Special offer until 31st May 2026

Was £429 Now £369

Save £60

Perfect for finishing seams and curves in no time. The MyLock 454D is a stable, smooth sailing overlocker with HANENITE* vibration suppression, making it quiet and a pleasure to use.

HANENITE is a registered trademark of Naigai Rubber Industry Co., Ltd.

• 4 THREAD OVERLOCKER FOR STITCHES USING 3 OR 4 THREADS, FLATLOCKING, AND ROLLED HEMMING 

• COLOUR CODED THREAD GUIDES AND THREADING REFERENCE CHART LOCATED INSIDE FRONT OPENING COVER. 

• MANUAL LAY-IN THREAD TENSION 

• PRESSER FOOT TENSION RELEASE 

• SEWING SPEED UP TO 1,300 S.P.M. (STITCHES PER MINUTE) 

• ADJUSTABLE STITCH LENGTH 1MM TO 4MM 

• ADJUSTABLE CUTTING WIDTH BETWEEN 3.1MM TO 7.3MM 

• DIFFERENTIAL FEED RATIO 0.5 TO 2.25 

• ADJUSTABLE FOOT PRESSURE 

• USES JANOME BALLPOINT HAX1SP NEEDLES 

• QUICK CHANGE TO ROLLED HEM 

• RETRACTABLE UPPER KNIFE WITH EASY ACCESS RELEASE 

• FACE PLATE THREAD CUTTER 

• FOOT CONTROL 

• MOULDED CARRY HANDLE 

Professionally finish your garments and experiment with stretchy fabrics. This NEW 3/4 thread Overlocker, Model ML454D from JANOME has an improved fabric feed. An 8-piece feed dog enables fabrics to glide under the foot. Refinements like the gentle curve at the tip of the presser foot helps for a smooth start. The bi-level performance for stitching multiple layers is impressive and the presser foot also has added texture on the underside to assist in fabric feeding and fabric slippage. 

An easy threading lower looper mechanism with colour coded threading chart is located inside the front sliding cover, this makes getting started and changing thread colours easy! 

It’s fast and finishes like a dream. Easy changeover to rolled hemming, the upper knife release operation is a gentle push. Smooth sewing of thin fabrics resulting in less puckering to help create beautiful, consistent overlocking and fine rolled hems. Excellent needle visibility keeps overlocking on target. 

Optional accessories are available for a variety of overlocking techniques. 

MyLock 454D Included Accessories

HA15X1SP Needles (Ballpoint) 

366412002 Screwdriver (Large) 784810002 

366413003 Screwdriver (Small) 792030005 

779502002 Standard Foot 

 787541101 Foot Holder 

624801001 Tweezers 

200217101 Gathering Attachment 

Instructional DVD - QR Code 

C-2085-1 Foot Control 

MyLock 454D Full Specification

Standard 3 & 4 Thread Overlocker 

Category: D 

Machine Size: W311 x H282 x D270 mm 

Easy Rolled Hem Conversion (No Plate Change) 

Flat Bed 

Approximate Weight: 6.1kg 

8 Piece Feed Dog 

Maximum Sewing Speed: 1,300 s.p.m. (appx.) 

Maximum Stitch Length: 1.0mm – 4.0mm 

Adjustable Cutting Width mm 

Using Left Needle – 5.3 – 7.3 

Using Right Needle 3.1 – 5.1 

Standard Stitch Length 3mm 

Presser Foot Adjustment (Screw-in) 

Seam Width (Standard): 3.5mm 

Snap On Presser Feet 

Pre-tension (Slide-in) 

Easy Threading Lower Looper 

Needle Guard Front & Back 

Rolled Hem: 2.0mm 

Retractable Upper Knife 

Differential Feed Ratio: 0.5 to 2.25 

Colour Coded Threading Guide 

LED Light x 1 

HANENITE Rubber Feet - Less vibration & noise 

Origin: Taiwan 

MyLock 454D Optional Accessories

202039000 1/8” & 3/16” Piping Foot 

202041108 Beading Attachment & Foot 

202040004 Blind Stitch Foot 

202525008 Cloth Guide  

202034005 Cording Foot A 

202035006 Cording Foot B 

202523006 Elastic Gathering Attachment  

202036007 Gathering Attachment  

200248101 Gathering Foot 

202033004Tape Foot with Tape Reel - Supplied as Three separate Parts 

200206004 Tape Guide

200204002Tape Foot  

000115700 TP Screw 4 x 10 

202438106 Extra Wide Table 

202456409 Waste Chip Box